Connectors and Accessories EDGE
A feature of the EDGE system is the seemingly floating table top, which is enabled by the table top being attached to the legs with a spacer. Rectangular profiles connect a pair of legs and make for a stable frame construction, which also supports thin table plates. The system offereshigh stability without any visible screws. With angular connections, we can build a stable corner posts width of 600 to 800 mm. Fixed and telescopic connectors are available.
AVAILABLE ACCESSORIES
CONNECTORS EDGE
Connector 600, L: 590 mm
30831 | RAL 9006G
20831 | RAL 9005FE
Connector 800, L: 790 mm
30832 | RAL 9006G
20832 | RAL 9005FE
Connector 1000, L: 990 mm
30833 | RAL 9006G
20833 | RAL 9005FE
Connector 1200, L: 1190 mm
30834 | RAL 9006G
20834 | RAL 9005FE
CONNECTORS EDGE
Connector 1400, L: 1390 mm
30835 | RAL 9006G
20835 | RAL 9005FE
Connector 1600, L: 1590 mm
30836 | RAL 9006G
20836 | RAL 9005FE
Connector 1800, L: 1790 mm
30837 | RAL 9006G
20837 | RAL 9005FE
Connector 2000, L: 1990 mm
30838 | RAL 9006G
20838 | RAL 9005FE
CONNECTORS EDGE TELESCOPIC
Connector 900–1400
31491 | RAL 9006G
21491 | RAL 9005FE
Connector 1500–2000
31492 | RAL 9006G
21492 | RAL 9005FE
CORNER CONNECTOR EDGE
31437 | RAL 9006G
21437 | RAL 9005FE
CONNECTOR EXTENSION EDGE
31493 | RAL 9006G
21493 | RAL 9005FE
In the consecutive mounting of table plates, we avoid an extra leg with using the connector extensions EDGE.
SUPPORTER EDGE
31497 | RAL 9006G
21497 | RAL 9005FE
Used as a fixed connection of square profiles between a chest of drawers and the table plate. With the help of the EDGE supporter it makes a stable connection with the leg on the opposite side of the table. The element is used for table plates of width of 600 and 800 mm.
COMPUTER HOLDER
30846 | RAL 9006G
20846 | RAL 9005FE
The holder offers a stable and functional frame for mounting the computer under the table plate. It can also be used without a wooden shelf. Packed in a cardboard box (2 pieces).
WIRE SHELF
31498 | RAL 9006G
21498 | RAL 9005FE
The shelf enables placing the cables and other elements under the table plate, with hanging the shelf on the HIDE connectors without any drilling required. It can be hanged when the table is already assembled.
