Accessories for All Systems
These practical accessories are intended for all VOGA TRADE systems. Among them you will find holders and shelves for cables, angular connectors, blinds, trolleys for personal computers, wheels, ladders and railings.
AVAILABLE PRODUCTS
CABLE HOLDER
20048 | Plastic
L: 120 mm
Intended use: To easily ensure cables under the table plate.
DOUBLE CABLE HOLDER
20640 | Plastic
L: 215 mm
Intended use: To easily ensure cables under the table plate.
CABLE TUBE ø72
30077 | RAL 9006G
20077 | RAL 9005FE
Other colours by request
H: 715 mm / W: ø 72 mm
Wire spring.
CABLE SHELF
30525 | RAL 9006G
20525 | RAL 9005FE
Other colours by request
H: 70 mm / L: 300 mm / D: 130 mm
Intended use: To place cables and other elements under the table plate.
ANGULAR CONNECTING PLATE
30705 | RAL 9006G
20705 | RAL 9005FE
Other colours by request
H: 120 mm / L: 50 mm / D: 120 mm
Metal connecting plate for a wider use.
BLIND
30093 | RAL 9006G
Other colours by request
H: 429 mm / L: 485 mm
BLIND screen can be used as a decorative element. It attaches to a table top behind a computer screen or between two workstations and thus also serves as a partition for assembled tables.
COMPUTER SHELF
30056 | RAL 9006G
20056 | RAL 9005FE
The shelf can be used as a stand-alone element attached to wooden elements, or in conjunction with desk bars on the left or right side of the table by attaching it to the table top over all types of DESK BAR system legs.
COMPUTER TROLLEY
30641 | RAL 9006G
Other colours by request
H: 280 mm / L: 233 mm / D: 520 mm
This mobile PC computer carrier makes connection and disconnection of cables easier. Wheels are placed under the support plate to allow the trolley to move.
FURNITURE WHEEL WITH PLATE 42×42
20677 | Plastic
H: 102 mm
Intended for drawers and smaller cabinets. All wheels have a built-in brake and a rubber tread with a 42 x 42 mm mounting plate. The load for one wheel is 40 kg.
BUNK BED LADDER V
30692 | RAL 9006G
Other colours by request
H: 1348 mm / L: 356 mm
Made of curved metal profiles and allows safe access to the top of the bunk.
BUNK BED FENCE V
30693 | RAL 9006G
Other colours by request
H: 277 mm / L: 1218 mm / D: 22 mm
Designed to protect the upper floor of the bunk bed.
PERFORATED BACK
BACK 800, L: 700 mm, 30165 | RAL 9006G
BACK 1000, L: 900 mm, 30166 | RAL 9006G
BACK 1200, L: 1100 mm, 30167 | RAL 9006G
BACK 1400, L: 1300 mm, 30168 | RAL 9006G
BACK 1600, L: 1500 mm, 30169 | RAL 9006G
BACK 1800, L: 1700 mm, 30170 | RAL 9006G
BACK 2000, L: 1900 mm, 30171 | RAL 9006G
Other colours by request
Made of perforated sheet metal with square holes 10 x 10 mm, 45 mm apart. The back is attached to the lower part of the table top via brackets.
BACK HOLDER
30030 | RAL 9006G
Other colours by request
H: 308 mm / L: 62 mm
These brackets are used to attach wooden or metal perforated backs. You need two brackets for backs 800–1400 mm long, and three brackets for backs 1600–2000 mm long.
